Contact & Quote
Send us your drawing or enquiry; our engineering team usually replies with price and lead time within the same working day.
34490 Başakşehir / İstanbul
Show on map →
Request a Quote
Konya, Ankara, Izmir: Anatolia's Machinery Manufacturing Centres and CNC Capacity
Turkey's machining capacity is not limited to Istanbul and Bursa; Konya, Ankara and Izmir are Anatolia's machinery manufacturing centres, each with a different sectoral character. Konya for agricultural machinery, casting and automotive suppliers; Ankara for defence, aerospace and rail; Izmir for machinery manufacturing, stainless and port access. This article compares the three centres in a table, examines each one's strengths and weaknesses for European buyers, lists other Anatolian centres, offers a practical evaluation and visit plan, gives an example of three parts from three cities and answers FAQs.
Turkey Read more
Deep Hole Drilling and Thin-Walled Parts: Challenges, Methods and Design Recommendations
Holes longer than five times their diameter and parts with wall thickness below 1 mm are two classic challenges that multiply cost and risk in CNC machining. Drill drift, chip packing and heat in deep holes; clamping deformation, chatter and thermal expansion in thin walls. This article covers both from the supplier's and the designer's perspective: when a hole counts as deep, the problems, methods including gundrilling and BTA, deep holes on Swiss-type lathes, when a wall counts as thin, workholding solutions, design recommendations, cost impact and FAQs.
Technical Read more
Swiss-Type Turning for Electronics and Connector Parts: Pins, Housings, Contacts
The electronics and electromechanical sector is the most natural market for Swiss-type turning: pins, sockets, contact housings, sensor enclosures and cable glands with Ø0.5–20 mm diameters, ±0.01 mm tolerances, plated surfaces and volumes in the hundreds of thousands. This article is a practical guide for electronics and connector manufacturers: typical part families, material selection, tolerance and surface, the plating chain, volume and delivery model, quality system and documents, points to watch when sourcing from Turkey, an M12 sensor connector example and FAQs.
Electronics Read more