Swiss-Type CNC Machining in Turkey

Why Swiss-type machining

On a Swiss-type lathe the bar is supported by a guide bushing right next to the cutting tool. Slender, long parts therefore do not deflect, and surface finish and diameter tolerance are far more stable than on a conventional lathe. The sub-spindle machines the back of the part in the same cycle; drilling, milling, cross-holes and threading are added so the part leaves the machine complete.

Connector pins, sensor bodies, valve needles
Medical and dental implant screws, cannulas
Automotive injection and brake system components
Micro parts for watches, optics and electronics

Unit cost in series production

With cycle times measured in seconds and minimal operator intervention, Swiss-type machining delivers the lowest unit cost for medium and high volumes. Combined with Turkey's competitive labour and energy costs, savings of 30–50 % including logistics are achievable for European buyers; bar stock is sourced to European standards (1.4305, 1.4404, CuZn39Pb3, EN AW-6082 etc.).

Frequently Asked Questions

Which diameter range do you cover?

We machine bar stock from Ø1 mm to Ø32 mm. Larger diameters are handled by our CNC turning line.

What is the minimum quantity?

Because of set-up time, Swiss-type machining is usually economical from around 500 pieces; for smaller quantities we quote CNC turning instead.

Do you provide material certificates?

Yes – EN 10204 3.1 certificates for the bar stock and, on request, a batch inspection report.

Get a free quote for your project

Send us your drawings (STEP, DXF, PDF); our engineering team usually replies with price and lead time within one working day.

Get a Quote →Chat on WhatsApp

Related Pages

Latest from the BlogAll articles →

November 2026

Turkey or Czechia? CNC Subcontracting Comparison for Central European Buyers

For German and Austrian purchasers, the two classic addresses in the search for "close and cheap" are Czechia and Turkey. Czechia is an EU member, a few hours from the border and has a deep engineering tradition; Turkey offers lower cost, much larger capacity and a young workforce, but is 4–6 days away by road. This article puts the two countries side by side with measurable criteria: comparison table, cost, capacity and flexibility, quality, logistics and customs, currency and inflation risk, communication and culture, which part for which country, the dual-sourcing strategy, a numerical example and FAQs.

Comparison Read more

November 2026

Konya, Ankara, Izmir: Anatolia's Machinery Manufacturing Centres and CNC Capacity

Turkey's machining capacity is not limited to Istanbul and Bursa; Konya, Ankara and Izmir are Anatolia's machinery manufacturing centres, each with a different sectoral character. Konya for agricultural machinery, casting and automotive suppliers; Ankara for defence, aerospace and rail; Izmir for machinery manufacturing, stainless and port access. This article compares the three centres in a table, examines each one's strengths and weaknesses for European buyers, lists other Anatolian centres, offers a practical evaluation and visit plan, gives an example of three parts from three cities and answers FAQs.

Turkey Read more

November 2026

Deep Hole Drilling and Thin-Walled Parts: Challenges, Methods and Design Recommendations

Holes longer than five times their diameter and parts with wall thickness below 1 mm are two classic challenges that multiply cost and risk in CNC machining. Drill drift, chip packing and heat in deep holes; clamping deformation, chatter and thermal expansion in thin walls. This article covers both from the supplier's and the designer's perspective: when a hole counts as deep, the problems, methods including gundrilling and BTA, deep holes on Swiss-type lathes, when a wall counts as thin, workholding solutions, design recommendations, cost impact and FAQs.

Technical Read more