Blog
Technical insights, industry news and engineering tips from the world of CNC machining.
How to Outsource CNC Machining from Norway to Turkey: Step-by-Step Process
As an oil and gas equipment supplier in Stavanger, a maritime or aquaculture manufacturer in Bergen, or a defence and automation company around Kongsberg, placing your first CNC subcontracting order in Turkey is easier than you might think. This guide walks through the process step by step, from preparing technical documents and the RFQ to evaluating quotes, from sample approval to import under the EFTA agreement with EUR.1, from offsetting MVA in the VAT return to logistics options and NOK/EUR payment terms.
Norway Read more
How to Read a CMM Inspection Report: Quality Evidence for Subcontracted CNC Parts
Inside the box from your CNC supplier in Turkey there is a CMM report: pages of columns, green and red bars, abbreviations such as "MMC" and "DATUM A|B|C". This article explains what each section of the report means, the nominal-actual-deviation columns, how geometric tolerances such as position and flatness are reported, why datum alignment changes the results, measurement uncertainty and the decision rule, the signs that distinguish a fake or careless report, and the right way to compare it with your own measurements.
Quality Read more
How to Outsource CNC Machining from Denmark to Turkey: Step-by-Step Process
As a wind turbine supplier in Jutland, a pump or hydraulics manufacturer around Bjerringbro or Nordborg, or a medical device company in Copenhagen, placing your first CNC subcontracting order in Turkey is easier than you might think. This guide walks through the process step by step, from preparing technical documents and the RFQ to evaluating quotes, from sample approval to duty-free import under A.TR, from offsetting importmoms in the VAT return to logistics and DKK/EUR payment terms.
Denmark Read more
EUR.1 and A.TR Certificates: Proof of Origin and Duty Relief When Importing CNC Parts
It is normal for a European company importing CNC parts from Turkey to see an A.TR or EUR.1 in the shipping documents; but what the two mean, which is valid in which country, and the fact that neither is proof of "origin" in the same sense are often confused. This article explains that the A.TR is a free-circulation document and the EUR.1 a preferential origin document, which one is required for which country, how rules of origin apply to machined metal parts, invoice and supplier's declarations, and what buyers who re-export their products need to watch.
Customs Read more
How to Outsource CNC Machining from Sweden to Turkey: Step-by-Step Process
As an automotive supplier in Gothenburg, a machine builder in Småland or a medical technology company around Stockholm, placing your first CNC subcontracting order in Turkey is easier than you might think. This guide walks through the process step by step, from preparing technical documents and the RFQ to evaluating quotes, from sample approval to duty-free import under A.TR, from import VAT (moms) to logistics options and SEK/EUR payment terms.
Sweden Read more
3-Axis, 4-Axis, 5-Axis Milling: Which Does Your Part Really Need?
"5-axis" always sounds better; yet the vast majority of milled parts are produced more cheaply and at the same quality on 3 or 4 axes. This article explains what the number of axes means, which geometries genuinely require 4 or 5 axes, the difference between 3+2 (positional) and simultaneous 5-axis, the cost effect through hourly rate and number of set-ups, and the design decisions that make your drawing producible with fewer axes.
Technical Read more
How to Outsource CNC Machining from Belgium to Turkey: Step-by-Step Process
As a machine builder in Flanders, an aerospace supplier around Liège or a process-equipment manufacturer in Antwerp, placing your first CNC subcontracting order in Turkey is easier than you might think. This guide walks through the process step by step, from preparing technical documents and the RFQ to evaluating quotes, from sample approval to duty-free import under A.TR, from VAT deferral with the ET 14000 licence to Incoterms and payment terms.
Belgium Read more
Series Production in Free-Cutting Steel (11SMnPb30, 9SMn28): When Is It the Right Choice?
Pins, bushes, fasteners, hydraulic fittings, adjusting screws and small turned steel parts produced in the millions are mostly made from free-cutting steel. This article explains the properties of the 11SMn30 / 11SMnPb30 / 11SMn37 grades (formerly 9SMn28, 9SMnPb28, 9SMn36), why they machine so fast, when they should not be used (welding, hardening, corrosion), plating options, lead restrictions and what determines the price of a series turned part.
Material Read more
How to Outsource CNC Machining from Austria to Turkey: Step-by-Step Process
As a machine builder in Upper Austria, an automotive supplier in Graz or an equipment manufacturer around Vienna, placing your first CNC subcontracting order in Turkey is easier than you might think. This guide walks through the process step by step, from preparing technical documents and the RFQ to evaluating quotes, from sample approval with an EMPB to duty-free import under A.TR, from import VAT (EUSt) to Incoterms and payment habits.
Austria Read more